To show our confidence in our work, we offer unbeatable warranty programs, including warranties for water heater parts, water and waste repipes, and more. Also, financing options are available because we know that you can’t always plan for the unexpected. We’re local, passionate, professional, and affordable, and we always work within your budget and stay on schedule.
Prices as quoted ($500-781) OBVIOUSLY included the cost of the toilet. In my quote request I stated project was a totally unremarkable - removal of old toilet and install of the new toilet, which I will have purchased myself. There are no problems and this is not an old house. Simply want t upgrade from contractor grade toilet. I am a retired contractor with a bad back and I know what the project entails.

Plastic pipe is in wide use for domestic water supply and drain-waste-vent (DWV) pipe. Principal types include: Polyvinyl chloride (PVC) was produced experimentally in the 19th century but did not become practical to manufacture until 1926, when Waldo Semon of BF Goodrich Co. developed a method to plasticize PVC, making it easier to process. PVC pipe began to be manufactured in the 1940s and was in wide use for Drain-Waste-Vent piping during the reconstruction of Germany and Japan following WWII. In the 1950s, plastics manufacturers in Western Europe and Japan began producing acrylonitrile butadiene styrene (ABS) pipe. The method for producing cross-linked polyethylene (PEX) was also developed in the 1950s. Plastic supply pipes have become increasingly common, with a variety of materials and fittings employed.
Hi Kenneth, We would be happy to get you connected with a pro for your project. You can submit a service request on our website: http://www.homeadvisor.com/, or browse reviews for local water heater pros here: http://www.homeadvisor.com/c.html. We can also have a project advisor reach out to assist you if you send your contact information to [email protected] –HASupport
To work independently, a plumber is required to receive a license. In most states, the prerequisite for earning this license is two to five years of practical experience. There's also an exam to test technical know-how and understanding of plumbing codes. The United Association's website offers extensive information on licensing requirements by state.
As important as it is that you are able to distribute potable water throughout your home in a dependable manner, it would be a much less convenient state of affairs if you were not also able to dispose of that water just as conveniently, not to mention hygienically. That is why we suggest allowing our Master Plumbers to complete any and all drain and sewer services that you may require. From basic cleanings to complex repairs and eventual replacements, we truly do it all. If you have any reason to suspect a problem with your drain and sewer system, give us a call right away.
For over three decades, Snake 'n' Rooter Plumbing Company has proudly served the Greater Kansas City, Topeka, and Lawrence communities. Our family owned business was built on the foundation of “Quality, Service, & Integrity first”. From a clogged drain or leaky pipe, on to emergency plumbing repairs, our certified technicians can help you get it fixed when called upon. All technicians are required to deliver the clean and courteous service that you expect. We are available 24 hours a day, 7 days a week, with no additional charges incurred for service on night’s, weekends, or any holidays. With nearly 80% of our service calls completed with returning customers, we take tremendous pride in the level of quality and overall service that we provide on each and every service call executed. Any problem, any job, Snake 'n' Rooter Plumbing Company can handle it!
It has lots of different washers but the washers I needed that it led me to believe were in there were not. I wanted the washers for a DELTA sink that fit over the seat spring.There's many different kinds of washers here and its good to have around for misc repairs but it wasn't what I was looking for when I ordered them.It has everything BUT the washers I would need to fix a leaky bathroom sink!
No plumber is going to come right out and explain that they don’t have the required license to work for you. So if you know someone who is a great plumber, but they don’t have a license, hire them at your own risk. Licensed plumbers know the local building codes and regulations, have completed a certain amount of hours on the job and are insured. Want to become a master plumber yourself? Here are 28 tips.

Bob Carter started as with plumbers Indianapolis and moved his family to Greenwood in the late 1960’s.  He continued to do plumbing in Indianapolis and soon became a plumber in Greenwood as well.  Fast forward to today… Carter’s My Plumber is a 3rd Generation, family-owned Plumbing business operating from Greenwood, and serving the Indianapolis metro area. Son, Jamie and Grandson, Kelson now run the family business.
Of course, some repairs are easier and quicker to handle than others. Some are a major hassle—particularly those that involve working on pipes that are hidden behind walls or under floors or are otherwise difficult to access. This doesn’t mean you can’t do them yourself, it just means you may need a little more instruction, a few more tools, and a load of patience.
Whatever your preference and price point, there’s a tub to sooth. That’s, of course, if you want a bathtub. Many homeowners — particularly those who don’t have young children living with them — have thrown the tub out with the bath water in favor of installing a walk-in shower. Just make sure to consider the pros and cons of tub to shower conversions.
I am not a plumber, but I am familiar with oxidation.  Many simple plumbing valves only need to be removed and new "O" rings installed.  That's where the problem comes in.  Most older homes used metal pipes and not PVC.  Usually the valve screws into a different type of metal and oxidation occurs between the two metals, almost becoming one.  In order to get the valve stem out you have to break it loose.  If you break the pipe, not only do you have a mess but then you have to pay to fix it.  Simple if you break it you pay.  If a plumber breaks it, he is responsible.  I recommend paying the plumbers fee and save yourselves headaches in the long run. 
If nothing inside the home was altered you should not be getting a smell. Personally I'm confused as to why the repair person would have left the original line there and ran another one through a new hole. I would have pulled the old line up, ran the new line (in PVC) and used the same hole in the septic tank instead of creating a new one. Did he seal up the hole in the tank from the old line?
Cast iron and ductile iron pipe was long a lower-cost alternative to copper, before the advent of durable plastic materials but special non-conductive fittings must be used where transitions are to be made to other metallic pipes, except for terminal fittings, in order to avoid corrosion owing to electrochemical reactions between dissimilar metals (see galvanic cell).[17]
I initially called Charlie's Rooter Service (CRS) due to a sewer line backup. Lulu answered and was very nice. She set up the appointment and Luis arrived on time and was also very friendly. He pulled out the largest root structure (out of my pipe) either of us had ever seen. We had a good laugh. He called it the catch of the day and had me take a picture of him with it.
Of course, some repairs are easier and quicker to handle than others. Some are a major hassle—particularly those that involve working on pipes that are hidden behind walls or under floors or are otherwise difficult to access. This doesn’t mean you can’t do them yourself, it just means you may need a little more instruction, a few more tools, and a load of patience.
Prices as quoted ($500-781) OBVIOUSLY included the cost of the toilet. In my quote request I stated project was a totally unremarkable - removal of old toilet and install of the new toilet, which I will have purchased myself. There are no problems and this is not an old house. Simply want t upgrade from contractor grade toilet. I am a retired contractor with a bad back and I know what the project entails.

While you might be tempted to get out your wrench and try and fix those plumbing fixtures, plumbing can be a lot more complicated than you might think. In the wrong hands, even the simplest-seeming of plumbing repairs can quickly become something disastrous or costly. The chances are that, whatever your problem is, your local plumber has seen it before and will be able to rectify the situation, quickly and efficiently. Why run the risk of turning a simple job into a plumbing catastrophe, when you can book a cheap plumber through Handy to nip it in the bud? You won't ever have to search for "local plumbers near me" again!
Prices as quoted ($500-781) OBVIOUSLY included the cost of the toilet. In my quote request I stated project was a totally unremarkable - removal of old toilet and install of the new toilet, which I will have purchased myself. There are no problems and this is not an old house. Simply want t upgrade from contractor grade toilet. I am a retired contractor with a bad back and I know what the project entails.

I am not a plumber, but I am familiar with oxidation.  Many simple plumbing valves only need to be removed and new "O" rings installed.  That's where the problem comes in.  Most older homes used metal pipes and not PVC.  Usually the valve screws into a different type of metal and oxidation occurs between the two metals, almost becoming one.  In order to get the valve stem out you have to break it loose.  If you break the pipe, not only do you have a mess but then you have to pay to fix it.  Simple if you break it you pay.  If a plumber breaks it, he is responsible.  I recommend paying the plumbers fee and save yourselves headaches in the long run.  

Present-day water-supply systems use a network of high-pressure pumps, and pipes in buildings are now made of copper,[25] brass, plastic (particularly cross-linked polyethylene called PEX, which is estimated to be used in 60% of single-family homes[26]), or other nontoxic material. Due to its toxicity, most cities moved away from lead water-supply piping by the 1920s in the United States,[27] although lead pipes were approved by national plumbing codes into the 1980s,[28] and lead was used in plumbing solder for drinking water until it was banned in 1986.[27] Drain and vent lines are made of plastic, steel, cast-iron, or lead.[29][30]
Plumbing reached its early apex in ancient Rome, which saw the introduction of expansive systems of aqueducts, tile wastewater removal, and widespread use of lead pipes. With the Fall of Rome both water supply and sanitation stagnated—or regressed—for well over 1,000 years. Improvement was very slow, with little effective progress made until the growth of modern densely populated cities in the 1800s. During this period, public health authorities began pressing for better waste disposal systems to be installed, to prevent or control epidemics of disease. Earlier, the waste disposal system had merely consisted of collecting waste and dumping it on the ground or into a river. Eventually the development of separate, underground water and sewage systems eliminated open sewage ditches and cesspools.
×