According to standards set by the federal government, a low-flow showerhead uses no more than 2.5 gallons of water per minute at a water pressure of 80 pounds per square inch. That’s less than half the rate of water used by some older traditional showerhead models. Low-flow showerheads come in two main types, aerating, which creates a mist, or laminar-flow that sends water out in a steady stream.
Sump pumps are used to re-route water away from the lowest point of your home's foundation and protect your basement and easily damaged areas from flooding. In most cases, your sump pump is hardwired to your electrical system or possibly plugged into a wall outlet. Because these power sources can often fail in a storm when water damage occurs, sump pumps are typically equipped with battery backup power.
Yes I do know what approximately the part is and how much but the problem is  almost all plumbers & even electricians want $100 service call.  That's ridiculous as if the part is $25 that $125 to me and that's too much but I see they want the $$$$ so they start with a service call. Example my outdoor light bulb broke and I couldn't get it out of socket.  I had to call electrician.  Yes, $100 service call, handed me the bulb and I gave him a new one to put it and that was it. Took him all of 10 min.  So now I hesitate when I need something done in these fields and thank goodness so far I'm not in need of anything..
Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship. Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some classroom instruction, each year. In the classroom, apprentices learn safety, local plumbing codes and regulations, and blueprint reading. They also study mathematics, applied physics, and chemistry. Apprenticeship programs are offered by unions and businesses. Although most workers enter apprenticeships directly, some start out as helpers. The Home Builders Institute offers a pre-apprenticeship training program in plumbing and other trades.
As with other construction workers, employment of plumbers, pipefitters, and steamfitters is sensitive to fluctuations in the economy. On the one hand, workers may experience periods of unemployment when the overall level of construction falls. On the other hand, shortages of workers may occur in some areas during peak periods of building activity.
Are you 100% satisfied with the quality of the water in your home? It doesn’t matter if you use a private well or if you get your water from the municipal supply. There is no guarantee that your water is going to be of the high quality that you both deserve and demand. That is where our water treatment system professionals come in. When you hire us, we can test your water to determine precisely what’s gone wrong. We can then install the exact type of water treatment system that you need to get the most out of your water supply.
There are few things worse than waiting for a local plumber after being given an 8 hour time window, while your sink is spouting water all over the carpet or your toilet is overflowing. Using the Handy platform, you can arrange an exact time for your plumber to arrive, which means you don’t have to take an entire day off of work to sit around and wait for them. The plumbers on the Handy platform have seen it all and they have the ratings and reviews to prove it.  We’ll match the details of your job with a reliable plumber in your area before you know it.
Becoming a plumber is a two-pronged process that includes practical training and study. Traditionally, a hopeful plumber begins a four- or five-year apprenticeship program to receive technical education and complete the required hours of on-the-job training under a licensed professional. Plumbers who have successfully completed their apprenticeship are known as journeymen.
Hello I had a plumber do an estimate for me to replace our copper pipes with plastic as we have no existing walls up in our basement yet...pretty basic job... so we figured we could upgrade as we do live in Northern Ontario and it does tend to get quite cold here in the winters.  We dont have any existing problems with our plumbing right now just figured it would be good time to do the job and perhaps change the pipes to 3 quarter inch for faster flow.  Well I never thought in all my life I would get an estimate back that would state $350.00 an hour in labor...yes that is correct $350.00 an hour...estimated 10 hours for the job to be completed.  So he quoted me $3500.00 for labor alone.. not supplies?  Well needless to say I will be happy with my half inch copper pipes and will happily wait for my bathtub to fill up at a slower pace.  Just wanted to know what your thoughts are on this $350.00 an hour quote?  Thank you and enjoy your day.
Becoming a plumber is a two-pronged process that includes practical training and study. Traditionally, a hopeful plumber begins a four- or five-year apprenticeship program to receive technical education and complete the required hours of on-the-job training under a licensed professional. Plumbers who have successfully completed their apprenticeship are known as journeymen.
A plumber’s reputation depends on your satisfaction. As a result, any plumbing service professionals you book through Handy will take their responsibility to you very seriously. They will want to turn up on time, bring the right equipment and get the job done as professionally as possible. That way, they know you’ll leave them a good review and they’ll get more work! To give you further peace of mind, every plumbing repair done on the Handy platform is backed by the Handy Happiness Guarantee. This means that, in the unlikely event that you’re unsatisfied, Handy will work hard to make things right.
Each Government at the state level has their own Authority and regulations in place for licensing plumbers. They are also responsible for the interpretation, administration and enforcement of the regulations outlined in the NCC.[38] These Authorities are usually established for the sole purpose of regulating plumbing activities in their respective states/territories. However, several state level regulation acts are quite outdated, with some still operating on local policies introduced more than a decade ago. This has led to an increase in plumbing regulatory issues not covered under current policy, and as such, many policies are currently being updated to cover these more modern issues. The updates include changed to the minimum experience and training requirements for licensing, additional work standards for new and more specific kinds of plumbing, as well as adopting the Plumbing Code of Australia into state regulations in an effort to standardise plumbing regulations across the country.[39]

Plumbing Service Company

×